This was technically two short WODs thrown together. For the first one, you'll need a good way to track that 60 seconds have passed. It's one of the "every minute on the minute" work outs, where you have up to 60 seconds to finish a set of exercises. If you finish those exercises in less than 60 seconds, rest until the 60 seconds are up. If you can't complete the set before the 60 seconds are up, jump right into the next set for the next minute. Basically, there is a very real reward for finishing your reps early: you get to rest.
For the second WOD, just bang out the reps as fast as you can. You have 10 minutes to try to finish the 150 reps. There's nothing fancy here, just start the clock and do your reps.
As far as safety goes, there are several exercises that require strict attention to form. The power cleans, hang power cleans, hang squat cleans, and thrusters can all hurt your back if you get sloppy about form. Keeping that in mind, don't get sloppy about your form. That way, you won't get hurt.
WoD
Every Minute on the Minute (for 15 minutes):
Rest 2 minutes
In 10 minutes or less:- 150 thrusters
Exercises
- Power Clean
You'll need a barbell for this, and you'll want to weight it fairly heavily. I usually see between ~45lbs and ~90lbs.
To begin with, put the weight on the ground in front of you (this is different than the "high hang" where you start with the weight near your thighs). Squat down to grab the weights, but remember to face forward and keep your chest facing forward. Stand up, but as you do so, shrug your shoulders aggressively. I know it sounds silly, but it should be an *aggressive* shrug. You really want to build some momentum in that motion. However, keep your arms locked as you're doing this, or you'll end up doing more of a curl. If you need to make sure you've got it down, practice just that part of it a few times.
The next step, starting from the shrugged shoulder position, is to quickly bring the weight up to about chest level and do a quick hop at the same time. If you were to watch the path the weight travels, it should be as close to your body as possible, and as close to completely vertical as possible. If the weight travels in an arc away from your body, you're doing it wrong. Your hands don't lift the weight as much as they adjust themselves to hold the weight differently. At the end of this motion, you should have your palms facing away from your body, as if you were "racking" the weight near your chest/clavicle.
You can almost think of it as letting go of the weight in midair, and positioning your body underneath the weight so that you end up with your knees slightly bent and the weight at your chest. Don't actually let go of the weight, that can be all sorts of bad. However, you'll find that because it's a quick hop, you're pretty much jumping into it. At the same time, your hands will suddenly shoot up to hold the weight at your chest.
As always, keep a good lumbar curve. You don't want to bend over as you do this. If you do it wrong repeatedly or with a heavy enough weight, your lower back will pay for it. Again, practice just the squat motion a few times so that it feels natural.
Lastly, just stand up completely while holding the weight at your chest. You basically just need to straighten your legs out, but you don't want to do this step until you've got full control of the weight. Normally, you would then put the bar back down on the ground to finish the rep, but in this case, you are considered done when you stand tall with the weight racked at your chest/clavicle. All that's really left is to put it all together in a smooth motion.
- Hang Power Clean
You'll need a barbell, weighted as heavily as you can handle. I usually see between 45lbs and 90lbs.
The starting position for this is with the barbell around mid-thigh in front of you, with a slight bend to your waist (this position is considered a "high hang" so that's where the name comes from). Obviously, though, you have to get the barbell there from the ground somehow. The safest way to do this is actually to deadlift the barbell. In essence, keep your chest up, bend down, and then lift the barbell from the ground using your legs (not your back).
From that position, shrug your shoulders. I know it sounds silly, but it should be an *aggressive* shrug. You really want to build some momentum in that motion. Remember, though, keep your arms locked as you're doing this, or you'll end up doing more of a curl. If you need to make sure you've got it down, practice just that part of it a few times.
The next step, starting from the shrugged shoulder position, is to quickly bring the weight up to about chest level and bend your knees a tiny bit at the same time. If you were to watch the path the weight travels, it should be completely vertical. If the weight travels in an arc away from your body, you're doing it wrong. Your hands don't lift the weight as much as they adjust themselves to hold the weight differently. At the end of this motion, you should have your palms facing away from your body, as if you were "racking" the barbell near your chest/clavicle. You can almost think of it as letting go of the weight in midair, and positioning your body so that you can receive the weight with the weight at your chest. Don't actually let go, that can be all sorts of bad.
However, you'll find that because there's so much momentum and you're trying to "catch" the weight with your knees slightly bent, you're pretty much jumping into it. At the same time, your hands will suddenly shoot up to hold the weight at your chest. As always, keep a good lumbar curve. You don't want to bend over as you do this. If you do it wrong repeatedly or with a heavy enough weight, your lower back will pay for it. You can practice this one step at a time until the motion starts to feel more natural.
Lastly, just stand up straight while holding the weight at your chest. Once you've stood all the way up, you can drop the weight back down to thigh-level to start over. That's the end of a single rep. Now all that's left is to put it all together in a smooth motion.
- Hang Squat Clean
The starting position for this is with the barbell around mid-thigh in front of you, with a slight bend to your waist (this position is considered a "high hang" so that's where the name comes from). Obviously, though, you have to get the barbell there from the ground somehow. The safest way to do this is actually to deadlift the barbell. In essence, keep your chest up, squat down, and then lift the barbell from the ground using your legs (not your back).
From that position, shrug your shoulders. I know it sounds silly, but it should be an *aggressive* shrug. You really want to build some momentum in that motion. Remember, though, keep your arms locked as you're doing this, or you'll end up doing more of a curl. If you need to make sure you've got it down, practice just that part of it a few times.
The next step, starting from the shrugged shoulder position, is to quickly bring the weight up to about chest level and bend your knees a tiny bit at the same time. If you were to watch the path the weight travels, it should be completely vertical. If the weight travels in an arc away from your body, you're doing it wrong. Your hands don't lift the weight as much as they adjust themselves to hold the weight differently. At the end of this motion, you should have your palms facing away from your body, as if you were "racking" the barbell near your chest/clavicle. You can almost think of it as letting go of the weight in midair, and positioning your body so that you can receive the weight with the weight at your chest. Don't actually let go, that can be all sorts of bad.
However, you'll find that because there's so much momentum and you're trying to "catch" the weight with your knees slightly bent, you're pretty much jumping into it. At the same time, your hands will suddenly shoot up to hold the weight at your chest. As always, keep a good lumbar curve. You don't want to bend over as you do this. If you do it wrong repeatedly or with a heavy enough weight, your lower back will pay for it. You can practice this one step at a time until the motion starts to feel more natural.
Lastly, just stand up straight while holding the weight at your chest. Once you've stood all the way up, you can drop the weight back down to thigh-level to start over. That's the end of a single rep. Now all that's left is to put it all together in a smooth motion.
- Burpee
It's a 5 step motion: 1) squat down & touch the ground, 2) kick your legs out into a push-up position, 3) do a push up, 4) jump back to the squatting position, 5) come up from squatting and jump 2 inches off the ground. Once it starts to feel normal to do this motion, you can start to make it a smoother motion by essentially dropping down into a push up position, rather than squatting and then kicking out your feet. It requires a little bit less energy, but it also requires more coordination and muscle memory.
Scale down: Step back into the push up instead of jumping. Same goes for when you go back to the squatting position (step 4); step forward instead of jumping.
- Thruster
Since you're already using a barbell for the hang power cleans, use the same bar for the thrusters. I usually see between 45lbs and 90lbs on the bar.
To start, hold the barbell slightly below shoulder level with both your palms facing away from your body so that you can see both palms in a mirror. If you've got enough strength and flexibility in your wrists, bring your elbows straight up so that they point away from your body. This will force more of the weight against your upper torso and put more of a strain on your wrists, so only do this if you can sustain this position through a lot of reps. Regardless of how high you bring your elbows, the weights are "racked" against your chest.
Keeping the barbell racked against your chest, do an air squat so that your thighs end up parallel to the ground; if you can "break parallel," that's even better. As you come up, press the barbell directly over your head, until your arms are fully extended. Push the barbell straight up & down, since any horizontal motion will put undue stress on your shoulders.
To finish the rep, you have to bring the weight back to a rack position. For this, you can actually make it a smooth motion, and go straight into the next squat instead of stopping at starting position. This is fine so long as you fully extend the barbell, bring the weight back down before you start your next squat, and keep a good curve on your lower back the whole time.
No comments:
Post a Comment