Thursday, December 31, 2015

2015.10.28

This one was all about the Olympic lifts. You're going to be doing a lot of them, and the strength portion is specifically built to tax some of the same muscles as the WOD. For the strength portion, do the three exercises without putting the bar down. That's what will help build your strength. Also, whatever warm up you do, be absolutely positive to warm up the big muscles in your legs, your shoulders, and your core. You're going to need them all.

It should be a no-brainer, but protect your back with good form when you're doing this WOD. You will do 10 minutes straight of clean and jerks, so you'll want to do all of them properly. You most definitely can hurt yourself if you get sloppy, so don't get sloppy.


Strength
10 minutes of:
WoD
10 minutes of:
Exercises
  • Strict Press

    Grab a barbell. You'll want to weight it with as much weight as you can handle for the WOD. I usually see between ~45lbs and ~90lbs.

    To start, hold the barbell slightly below shoulder level with both your palms facing away from your body so that you can see both palms in a mirror. You want the weights "racked" against your chest, with your elbows farther forward than the bar. You don't need to bring them all the way up like you do with a front squat, but you do want your forearms vertical and supporting the bar from underneath.

    Once you've got the weight racked, lift the bar straight over head without using your legs. You are not going to dip or do a quarter squat. This is pure shoulder strength, with no legs to drive the momentum. Be sure to lift the weight straight up and down. In order to do that, though, you'll have to move your head backward as you lift. Otherwise, you'd hit yourself in the chin with the bar.

    At the top of the press, lock out your arms. The bar should be directly overhead, and you shouldn't have your back arched at. I've often heard this described as having everything "in line:" your legs, back, arms, ears, and the barbell should form a straight vertical line perpendicular to the ground.

    Bring the bar back down to the starting position in a straight line, as well. Again, move your head out of the way as you lower the bar. Once you've got the bar back in a racked position, you've finished the rep.

  • Push Press

    You'll need a barbell, weighted as heavily as you can. I usually see between 45lbs and 90lbs.

    To start, hold the barbell slightly below shoulder level with both your palms facing away from your body so that you can see both palms in a mirror. You want the weights "racked" against your chest, with your elbows farther forward than the bar. You don't need to bring them all the way up like you do with a front squat, but you do want your forearms vertical and supporting the bar from underneath.

    Do a quarter squat, and come up as explosively as you can. In reality, you'll end up end up hopping up a tiny bit because you're generating so much momentum/power from your legs. That's okay, but be absolutely sure that you're in control as you do this. You really don't want to trip or fall while holding a barbell. As you come up, press the barbell directly over your head. Remember, your legs should be driving the power in this motion, not your shoulders or arms. At the top of your motion, you want your arms to be fully extended and your legs completely straightened out. Also, bring your head forward a bit so that your arms, spine, and head are all aligned along the same vertical plane.

    One last cue is to make sure you move the weight directly up & down; if you start moving the horizontally, you'll put extra stress on your shoulders. If your elbows flare out horizontally, that's also going to make it difficult to press straight up & down. Finish your rep by bringing the weight back to beginning/racked position.

  • Push Jerk

    Hold the barbell at about shoulder level, with your palms facing away from your body so that you could see both palms in a mirror. In a sense, the weights are "racked" against your chest. If you've got enough strength and flexibility in your wrists, bring your elbows straight up so that they point away from your body. This will force more of the weight against your upper torso and put more of a strain on your wrists, so only do this if you can sustain this position through lots and lots of reps. Regardless of how high you bring your elbows, the weights are "racked" against your chest.

    From here, do a quarter squat to load up your legs to act as springs, and then you want to violently shove the barbell directly over your head. In fact, your momentum will cause you to do a slight hop while your hands go upwards. At the same time, you want to squat down (about a quarter squat). It might help to think about it as your lower body is racing to reach a quarter squat at the same time that the barbell reaches the top of the lift. At the top of the rep, your arms should be completely locked out, and you should be in a quarter squat position. Once you've got full control of the weight, stand tall. Then, and only then, should you re-position your feet. Because this lets you use your legs to drive the momentum and the power, this should feel easier than a strict shoulder press.

    To finish the rep, you have to lower the weight to the hang position safely (we're not allowed to just drop weights). From the locked out position at the very top, bring the weight straight back down to the racked position (resting on your shoulders/clavicle, palms facing away from you, elbows as high up as you can). You'll need to keep your chest facing forward the whole time; don't bend forward at any point. All of that is one rep. If you need to, practice the motion until it starts to feel natural; form is really important here.

  • Clean and Jerk

    Make sure you have a barbell with weight on it for this exercise; I usually see anywhere from about ~45lbs up to ~90lbs.

    To begin with, put the weight on the ground in front of you (this is different than the "high hang" where you start with the weight near your thighs). Squat down to grab the weights, but remember to face forward and keep your chest facing forward. Stand up, but as you do so, shrug your shoulders aggressively. I know it sounds silly, but it should be an *aggressive* shrug. You really want to build some momentum in that motion. However, keep your arms locked as you're doing this, or you'll end up doing more of a curl. If you need to make sure you've got it down, practice just that part of it a few times.

    The next step, starting from the shrugged shoulder position, is to quickly bring the weight up to about chest level and do a quick hop at the same time. If you were to watch the path the weight travels, it should be as close to your body as possible, and as close to completely vertical as possible. If the weight travels in an arc away from your body, you're doing it wrong. Your hands don't lift the weight as much as they adjust themselves to hold the weight differently. At the end of this motion, you should have your palms facing away from your body, as if you were "racking" the weight near your chest/clavicle.

    You can almost think of it as letting go of the weight in midair, and positioning your body underneath the weight so that you end up with your knees slightly bent and the weight at your chest. Don't actually let go of the weight, that can be all sorts of bad. However, you'll find that because it's a quick hop, you're pretty much jumping into it. At the same time, your hands will suddenly shoot up to hold the weight at your chest.

    As always, keep a good lumbar curve. You don't want to bend over as you do this. If you do it wrong repeatedly or with a heavy enough weight, your lower back will pay for it. Again, practice just the squat motion a few times so that it feels natural. That's the "clean" part of this.

    The last part, the "jerk" in the name, involves violently shoving the barbell directly over your head. Make sure that you're in a quarter squat position, then very aggressively press the weights directly over your shoulders. In fact, your momentum will cause you to do a slight hop while your hands go upwards. At the top of the rep, your arms should be completely locked out, and you should stand tall. Because this lets you use your legs to drive the momentum and the power, this should feel easier than a strict shoulder press.

    To finish the rep, you have to lower the weight to the ground safely (we're not allowed to just drop weights). From the locked out position at the very top, bring the weight straight back down to the racked position (resting on your shoulders/clavicle, palms facing away from you, elbows as high up as you can). From there, lower the weight to your thighs using your arms. Lastly, squat down to put the weight on the ground. You'll need to keep your chest facing forward the whole time; don't bend forward at any point. All of that is one rep. If you need to, practice the motion until it starts to feel natural; form is really important here.

Happy CrossFitting.

No comments:

Post a Comment